ABB SM3000 User Manual page 81

SM3000
Multipoint Videographic Recorder
Vertical and Horizontal Chart Views only
Circular Chart View only
IM/SM3000–EN Rev. L
OR
Select Horizontal --> (Chart runs left to right with scale bar on
left), Horizontal <--(chart runs right to left with scale bar on right),
Vertical or Circular chart view.
Select the annotations to be displayed on the chart. Alarm
events and operator messages are displayed on the chart
adjacent to the point at which the alarm occurred – see
Section 4.3, page 10.
This initial setting can be changed by the operator if 'Chart
annotation select enable' is enabled in the Chart view menu
enables – see 'Menu Enables' on page 80.
Set the number of major vertical divisions to be displayed on the
scale bar and the chart.
Set the number of minor vertical divisions to appear between the
major chart divisions on the scale bar.
Set the number of divisions to appear on the chart.
6 Configuration
79