ABB SM3000 User Manual page 6

SM3000
Multipoint Videographic Recorder
2 Getting Started
1. Make connections and power-up the recorder.
Note. For detailed electrical connection information,
refer to Section 7.3, page 112.
Connection
Details
2. Select the configuration level and a quick start template.
Note. For detailed configuration information, refer to
Section 6, page 51.
Configuration
QuickStart Summary
Template Channels 1.1 to 1.6
4 to 20mA inputs,
QSMilliAmp
0 to 100.0 units
QSTHC_C Thermocouple type K
or QSTHC_F 0 to 100°C or 0 to 212°F
QSRTD_C Pt100 inputs
or QSRTD_F 0 to 100°C or 0 to 212°F
4 to 20mA, 0 to 2000 l/hr,
Q SF lo w
Totalizer enabled
Configuration
Menu
3. Set the time and date.
4
Operator 1
Operator 2
Operator 3
Operator 14
Operator 15
Main
4. Set the sample rate.
Chart Speed Sample Rate Internal Storage
10 mm/h
20 mm/h
60 mm/h
120 mm/h
240 mm/h
720 mm/h
5. Select the views required and the operator menu choices.
6. Configure the archive files.

Select the archive file enables
(the files to be archived)
7. Change the channel configurations.

Select a channel source
Select the input filter type:
instantanteous or max. and min. values
during the sample interval.

Select the input type, linearizer, ranges
and tag name

Select the alarm type, set the alarm trip
points, the tag and the hysteresis.

Set the count rate, preset &
predetermined count values
2 Getting Started
72s 13.2 months
36s 6.6 months 6
12s 2.2 months Channels
6s 1.1 months Enabled
3s 16.4 days
1s 5.5 days
IM/SM3000–EN Rev. L