ABB SM3000 User Manual page 54

SM3000
Multipoint Videographic Recorder
Configuration
Configuration Level
Protected
see Section 6.1.1, page 51)
Configuration Level
Unprotected
(see Section 6.1.1, page 51)
Check this box to
stop recording whilst
in configuration mode.
The existing security configuration parameters are retained (i.e. the
security configuration remains as currently configured) when a
configuration is opened from file or when a new configuration is
loaded. Check 'Load security configuration from file' to overwrite
the current security configuration with data from the file to be loaded
– see below.
Note 2
Fig. 6.1 Accessing the Configuration Level
Note.
1. If 'New Configuration' or 'Open a Configuration' is selected and the modified configuration file is saved later as the current
configuration, new internal data files for all enabled recording channels are created and any unarchived data is lost.
2. The option to load or retain the security configuration is available only to the System Administrator (User 1). If a new or
existing configuration file is opened by a user other than the System Administrator, the instrument's existing security
settings are retained.
52
Operator 1
Operator 2
Operator 3
Operator 14
Operator 15
Edit the current configuration. Changes are not implemented
until saved on exit from the Configuration level.
Cancel and return
to the Operator level.
Open a new configuration with
the default settings detailed in
Appendix D.2, page 174 – see
Note 1
Invalid Password Entered
(see
Note
Enter Password
(see Section 5.3, page 42)
Open a configuration saved
previously to internal or external
storage – see
Alternatively, open one of the
QuickStart templates – see
Appendix D.2, page 174.
Use the
between internal and external
storage.
Press the
below.
6 Configuration
in Fig. 5.1 on page 41)
Valid Password
Entered
below.
Note 1
key to toggle
key to cancel.
IM/SM3000–EN Rev. L