SM3000
Multipoint Videographic Recorder
4 Operation
4.1 Powering up the Instrument
When power is first applied to the instrument, its processor carries out a number of self-tests and displays the start-up screen. At the
end of the start up sequence the instrument displays the last Operator View that was displayed when the instrument was powered
down.
4.2 Displays and Controls
In normal day-to-day use, the instrument is operated via the Operator Keys located along the bottom of the screen.
Fig. 4.1 Displays and Controls
8
Chart View –
Bargraph View –
see Section 4.3
see Section 4.4
Digital Indicator View –
see Section 4.5
Process View – see Section 4.6
Status Icons –
see Appendix H, page 190
Enter Key
Selects the highlighted menu item.
If 'Screen capture' is set to 'Enabled' (see
Section 6.4.1, page 61) and external archive
media is inserted in the instrument, enables the
operator to save a snapshot of any operator
view to the external media if pressed when the
menu is not open.
IM/SM3000–EN Rev. L
4 Operation