ABB SM3000 User Manual page 106

SM3000
Multipoint Videographic Recorder
104
Select the analog output source.
Note. The analog output source can be any internal or external
analog signal.
Set the required analog output engineering range.
Note. The 'Engineering low' and 'Engineering high' settings are
the engineering values corresponding to the 'Electrical low' and
'Electrical high' values below.
Set the required analog output electrical range.
The 'Electrical low' and 'Electrical high' values are the minimum
and maximum values of the current output, in Electrical units –
range 0 to 23 mA.
Source Range High
Analog Output
Engineering High
Analog Output
Engineering Low
Source Range Low
6 Configuration
21mA
Analog Output
Electrical High
Analog Output
Electrical Low
0mA
IM/SM3000–EN Rev. L