ABB SM3000 User Manual page 73

SM3000
Multipoint Videographic Recorder
IM/SM3000–EN Rev. L
Enter the IP address of the SMTP server through which emails
are to be routed.
Enter the address(es) of the email recipient(s).
Select the options to enable:
Channels Report
A summary of all enabled channels is included in the email,
together with their instantaneous values.
Totalizers Report
A summary of all enabled totalizers is included in the email,
together with their instantaneous values.
External Media Report
A summary of the condition of the external media (if any) and
archiving status is included in the email. Fig. 6.9 on page 70 is
an example of a reports email.
Notes.

Reports, when enabled, are included only on an email
generated as a result of a real-time alarm event unless the
'Reports in ALL emails' box is ticked, in which case
enabled reports are included on every email generated.

Triggers 6 to 10, if enabled ('Source Type' set to anything
other than 'None' – see below), may be 'inverted', i.e. an
email is generated when the trigger source becomes
inactive instead of active. Event trigger source types that
cannot be inverted are: Alarm acknowledge, Any alarm
and New alarm.
Select up to 10 event source types to generate an e-mail.
Fig. 6.10 on page 70 is an example of an event-triggered e-mail.
6 Configuration
71