SM3000
Multipoint Videographic Recorder
Select the required view from
the drop-down box list.
The recorder's display
changes to the view selected
If enabled, the screen image updates every 10 seconds
Fig. E.4 Current Display
Fig. E.5 Recording Channels Page
Note. Alarm acknowledgement is enabled only if a user has been configured for remote operation access – see Section 6.4.5,
page 69.
182
Click to print the current display
Alarm status of each channel – refer to Appendix H
for idenfication of alarm icons
Appendix E – Ethernet
IM/SM3000–EN Rev. L