ABB SM3000 User Manual page 66

SM3000
Multipoint Videographic Recorder
64
Select the daylight saving method.
Note. Changes to daylight saving are effective immediately a
method is selected. However, if 'Cancel' is selected upon exiting
Configuration Mode (see Fig. 6.7, page 60), the last saved
daylight saving settings are restored.
Off Daylight saving is disabled.
Auto - USA The start and end of the daylight saving period in the
USA is calculated automatically.
The clock is incremented automatically by 1 hour at
2:00am on the first Sunday in April and decremented
automatically by 1 hour at 2:00am on the last Sunday
in October.
Auto - Europe The start and end of the daylight saving period in
Central Europe is calculated automatically.
The clock is incremented automatically by 1 hour at
2:00am on the last Sunday in March and decremented
automatically by 1 hour at 2:00am on the last Sunday
in October.
Auto - Custom The start and end of the daylight saving period can be
configured manually for regions that do not follow
either the USA or Europe conventions.
The clock is incremented automatically by 1 hour at
the manually selected start time and decremented
automatically by 1 hour at the manually selected end
time.
Note. Displayed only if 'Daylight Saving - Enable' is set to
'Auto - USA'.
Note. Displayed only if 'Daylight Saving - Enable' is set to
'Auto - Europe'.
Note. Displayed only if 'Daylight Saving - Enable' is set to
'Auto - Custom'.
Set the start and end of the daylight saving period.
6 Configuration
IM/SM3000–EN Rev. L