Setup; Introduction; Accessing The Setup Level - ABB SM3000 User Manual

SM3000
Multipoint Videographic Recorder

5 Setup

5.1 Introduction

Note. Users with Setup access can:

Start/Stop recording.

Switch between primary and secondary recording rates.

Set archiving 'on-line' and 'off-line'.

View internal and external archive media file directories and delete external archive media files.

5.2 Accessing the Setup Level

Setup
Setup
Security
Enabled
Setup Security
Not Enabled
Fig. 5.1 Accessing the Setup Level
Note. If an incorrect password is entered the display returns to the Operating view. However, if the maximum number of
consecutive incorrect password entries is exceeded, the user's access privileges are removed and the following message is
displayed:
If this occurs, access privileges can be reinstated only by the system administrator (User 1). If the system administrator's access
privileges have been removed, the security system must be disabled using the configuration security switch (Yellow switch) to
gain access to the configuration – see Section 6.1.2, page 51.
IM/SM3000–EN Rev. L
Operator 1
Enter Password
(see Section 5.3, page 42)
5 Setup
Invalid Password
Entered
(see Note Below)
Valid Password
Entered
41