Operator Messages - ABB SM3000 User Manual

SM3000
Multipoint Videographic Recorder

6.4.4 Operator Messages

68
Operator messages can be triggered via the Operator Menus or
a digital signal.
Message Tag
Enter the message text – 20 characters maximum.
Group
Select the group(s) to which the message is to apply.
Source ID
Select the internal or external signal source used to add the tag
to the Alarm Event log. Refer to Appendix A on page 129 for a
full list of sources available.
6 Configuration
IM/SM3000–EN Rev. L