Maintenance
•
Unscrew and remove the filler cap.
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and, if necessary, replace the
drainage plug sealing washers.
•
Screw and tighten the drainage plug.
•
Add 4 l (0.88 UK gal) of new engine oil
of the specified type.
•
Screw on the filler cap.
•
Warm up the engine up by running it for
a few minutes, then switch it off. After
thirty seconds, check the level with a oil
level dipstick. Top up if necessary.
CAUTION
THE OIL LEVEL MUST NEVER DROP BELOW THE MINI-
MUM MARKING OR EXCEED THE MAXIMUM MARKING;
AN OIL LEVEL NOT WITHIN THE MINIMUM AND MAXIMUM
MARKINGS MAY CAUSE SEVERE ENGINE DAMAGE
Verifica parastrappi
•
Operating from the left side of the mo-
torcycle, using a torque wrench, check
and if necessary tighten the nuts fixing
the crown to the support to the prescri-
bed torque
MAIN - 72
RSV4 RR-RF