APRILIA RSV4 RR 2017 Service Station Manual page 239

RSV4 RR-RF
THIS ERROR DISABLES THE TRACTION CONTROL.
P0564 Cruise control button - Brake switch
Electrical diagnosis:
•
(brake sensors errors) connect to the instrument panel diagnosis
Error cause
•
Malfunction or communication interruption from the button on the light switch control.
•
Malfunction or rupture of the rear brake switch
This error is indicated by lighting up in a fixed manner the general warning light.
Troubleshooting
•
connect the diagnostic tool and check the correct activation status of the brake levers con-
cerning the brake switches that are physically connected to the instrument panel: if OK,
check the stability of the connections, if NOT ok, check the proper state of maintenance of
the rear brake connector; if NOT OK, restore, if OK, maintaining the switch fitted on the
vehicle, check with a tester that there is no continuity between PIN 1 and PIN 3 of the switch
with the lever engaged/released; if NOT OK, replace the rear switch, if OK, check that there
is continuity between PIN 2 an PIN 3 of the switch with the brake lever released; if NOT OK,
replace the switch, if OK, check that there is continuity between PIN 1 and PIN 2 with the
brake lever engaged; if NOT OK, replace the switch, if OK, check that there is continuity
between PIN 1 and PIN 12 of the instrument panel;
•
If the instrument panel does not detect errors related to the brake switches, operate several
times the cruise control. If the problem persists, replace the LH light switch.
NOTE
THIS ERROR DISABLES THE CRUISE CONTROL.
Presa USB
Rimozione
•
Unscrew and remove the screws (1)
Remove the top fairing glass from the
seats of the motorcycle
Electrical system
ELE SYS - 239