APRILIA RSV4 RR 2017 Service Station Manual page 370

Engine
•
Remember to couple the connecting
rod shank and cap correctly, combin-
ing the respective numerical referen-
ces.
•
Use new connecting rod screws, lubri-
cating the thread and under the head..
•
Proceed with tightening according to
the procedure described in the tighten-
ing torque table using the torque
wrench and angular tightening with a
goniometer.
Crankcase closing
•
Insert the crankshaft together with con-
necting rods and pistons in the upper
crankcase.
•
Position the three centring dowels in
the crankcase.
•
Insert a new oil seal O ring in the spe-
cific seat.
•
Insert the maximum pressure valve in
the crankcase, composed of two sep-
arate parts
ENG - 370
RSV4 RR-RF