APRILIA RSV4 RR 2017 Service Station Manual page 245

RSV4 RR-RF
•
Inside the "BlueTooth" page if Blue-
Tooth is not active, proceed to activate
it by pressing the button indicated by
the arrow BlueTooth active -> green
button. Wait for the smartphone to rec-
ognize the PMP ECU until you see
PMP in "Available devices" list.
•
When the PMP is found, click on the
«PMP» line and make sure the smart-
phone is connected. Once connected,
the PMP is added to the «Paired devi-
ces» list and in the menu PMP appears
the message "Paired". Now the PMP is
connected to the phone and in the V4-
MP App you should note the motorcy-
cle data transmission.
After the first connection the system connects automatically to the instrument panel (key ON).
Once the connection is established you can start
the application by selecting the corresponding icon
By turning off the instrument panel (key OFF) the application automatically closes
CAUTION
TO MAINTAIN A SUCCESSFUL CONNECTION IT IS ESSENTIAL THAT THE KEY SWITCH IS IN
THE "ON" POSITION BEFORE THE APP IS LAUNCHED
CAUTION
AFTER THE KEY IS OFF IT WILL BE NECESSARY TO WAIT FOR ABOUT 20 SECONDS TO EN-
SURE THAT THE WIRELESS CONNECTION IS CLOSED.
IN CASE OF CONNECTION FAILURE JUST EXIT THE APPLICATION USING THE APPROPRIATE
BUTTON, CLOSE IT FROM THE BACKGROUND MENU AND MANUALLY RESTART IT.
IF THE PREVIOUS DEVICE IS NOT IN THE AREA, AFTER 20 SECONDS THE SYSTEM WILL BE
AVAILABLE TO CONNECT WITH A NEW SMARTPHONE.
Electrical system
ELE SYS - 245