APRILIA RSV4 RR 2017 Service Station Manual page 107

RSV4 RR-RF
WIRING TABLE F - INTERCONNECTION BE-
TWEEN ENGINE WIRING HARNESS AND MAIN
WIRING HARNESS
Check that the connectors have been connected
correctly and that the purple slide is in the end stop
position
1. Vehicle connector
2. Engine connector
WIRING TABLE G - VEHICLE EARTH CABLE
Battery-engine earth cable routing
The battery-engine earth cable must not be visible in the zone indicated by the red triangle symbol
1. Large clamp (clamp the battery-engine earth wiring to the demand sensor wiring as high up as pos-
sible)
2. Engine-battery earth cable
WIRING TABLE H - ENGINE EARTH CABLE
IF THE SCREWS (1) USED TO SECURE THE
EARTH CABLES ARE NOT FASTENED COR-
RECTLY IT MAY CAUSE THE VEHICLE TO
CATCH FIRE.
2. ENGINE EARTH lug from vehicle wiring har-
ness
3. ENGINE EARTH lug from engine wiring harness
4. ENGINE EARTH lug from battery-engine earth
cable
TAKE CARE NOT INVERT THE "FRAME
EARTH LUG FROM ENGINE WIRING HAR-
NESS" AND THE "BATTERY-ENGINE EARTH
CABLE ENGINE EARTH LUG "
Electrical system
ELE SYS - 107