Transmission Shift Housing Disassembly - Polaris RZR 800 2013 Manual

TRANSMISSION

Transmission Shift Housing Disassembly

IMPORTANT: Shift housing repairs are not possible
without performing transfer case disassembly. Read
and understand all instructions before beginning
disassembly.
1. Verify transmission is in neutral. Remove the (7) shift
housing case screws from the front of the
transmission and (2) from the backside as shown.
NOTE: Shift cable bracket removal is required.
8.14
2. Place the transmission shift housing onto a flat
surface as shown. Lift the transmission case half
straight up and remove.
NOTE: Shaft components may "catch" during
transmission case half disassembly. Work slowly
and deliberately to avoid component loss or
damage.
3. Remove the retaining ring and retaining plate.
4. Remove the reverse clutch gear assembly from the
housing. Inspect these components and replace if
needed.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.