Polaris RZR 800 2013 Manual page 120

ENGINE
15. Install the piston pin circlips. The circlip ends should
be installed at the 12 O'clock position.
NOTE: While installing piston circlips, cover all
engine passages. The clip could fall into the
engine during installation.
3.58
16. Install camshaft thrust plate (G) with new bolts.
Torque bolts to specification.
NOTE: New bolts have patch lock on the threads
and do not require Loctite™.
17. Assemble rotors as marked when disassembled.
Use a cleaner to remove marks previously made on
rotors.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
Thrust Plate Screw:
115 ± 12 in-lbs (13 ± 1.35 Nm)