Polaris RZR 800 2013 Manual page 396

TRANSMISSION
9. Remove the (2) screws that attach the gear position
sensor to the shift housing. Inspect the O-ring, switch
poles and contact pins for wear or damage. Replace
parts as required.
8.16
10. Remove the spacer, contact pins, springs, drum gear
and washer from the shift housing. Replace any
worn or damaged components.
11. Remove the outer detent screw, spring and ball from
the shift housing.
NOTE:
assembly before removing the outer detent
screw. Removing the detent sleeve first will allow
the detent ball and spring to fall into the shift
housing.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
DO NOT remove the detent sleeve