Polaris RZR 800 2013 Manual page 362

FINAL DRIVE
4. Install the shim (s) previously removed onto the
appropriate sides of the axle spool. Install the
bearings. The bearings are a slip-fit and will slide
onto the axle spool.
5. Install ring gear/axle spool assembly into the
housing.
7.50
6. Install the gearcase cover. Install the cover screws
onto the rear gearcase. Torque to specification.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
Cover Screws:
23-27 ft-lbs (31-37 Nm)