Pvt Assembly - Polaris RZR 800 2013 Manual

7. Mark the drive belt direction of rotation and remove
drive belt (see "DRIVE BELT - Belt Removal").
8. Remove driven clutch retaining bolt and driven
clutch.
9. Remove driven clutch offset spacers from the
transmission input shaft if present.
10. Install the Drive Clutch Holder (PN 9314177) (A).
11. Remove drive clutch retaining bolt and remove drive
12. Remove the (3) screws and (3) bolts that retain the

PVT Assembly

1. Inspect inner clutch cover. Replace if cracked or
2. Inspect the seal on the transmission input shaft.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
clutch using the Drive Clutch Puller (PA-48595) (B).
Drive Clutch Puller: PA-48595
Drive Clutch Holder: 9314177
inner clutch cover to the engine and transmission.
damaged.
Replace if damaged.
CLUTCHING
6
6.9