ZyXEL Communications GS1900 Series User Manual page 152

The following table describes the labels in this screen.
Table 100 Configuration > Loop Guard > Port > Edit
L ABEL DESC RIPT IO N
Port
Port List Displays the list of port index numbers to be configured.
State Select to enable or disable the loop guard feature on the port.
Action Select to have the Switch shut down a port and/or generate a log message if it detects that
packets sent out on that port loop back to the Switch.
Apply Click
Apply
Cancel Click
C a nc e l
Chapter 23 Configuration: Loop Guard
to save the changes.
to discard the changes.
GS1900 Series User's Guide
152