The Poe Edit Screen - ZyXEL Communications GS1900 Series User Manual

Table 67 Configuration > Port > PoE > Port (continued)
L ABEL
Name
Status
19.4.3 T he Po E Edit Sc re e n
Use this screen to configure Switch port PoE settings. Select a port and click
> >
Po rt Po E
Fig ure 120
The following table describes the labels in this screen.
Table 68 Configuration > Port > PoE > Port > Edit
L ABEL
PoE Port
Port List
PD State
PD Priority
Chapter 19 Configuration: Port
DESC RIPT IO N
This field displays the name of the time range (schedule) rule which is applied to the port. PoE is
enabled at the specified time or date.
This field displays whether the port can receive power from the Switch (
It shows if there is no schedule applied to the port.
-
screen to open this screen.
Po rt
Configuration > Port > PoE > Port > Edit
DESC RIPT IO N
Displays the list of port index numbers that are being configured.
Select to provide power to a PD connected to the port or
Ena b le
receive power from the Switch.
This field is not available for the SFP or SFP+ ports.
When the total power requested by the PDs exceeds the total PoE power budget on the Switch,
you can set the PD priority to allow the Switch to provide power to ports with higher priority.
Select to give the PD connected to this port the highest priority.
C ritic a l
Select to set the Switch to assign the remaining power to the port after all critical priority
Hig h
ports are served.
Select to set the Switch to assign the remaining power to the port after all critical and
Me dium
high priority ports are served.
Select to set the Switch to assign the remaining power to the port after all critical, high and
L o w
medium priority ports are served.
GS1900 Series User's Guide
122
) or not ( ) currently.
In O ut
in the
Edit C o nfig ura tio n
so the port cannot
Disa b le
>