Monitor: Mac Table; C Ha Pte R 10 Mo Nito R: Mac T A B Le; Overview - ZyXEL Communications GS1900 Series User Manual

10.1 O ve rvie w
This section provides information for
The
MAC T a b le
forwarded or filtered across the Switch's ports. When a device (which may belong to a VLAN group)
sends a packet which is forwarded to a port on the Switch, the MAC address of the device is shown on
the Switch's
static (manually entered in the
The Switch uses the
1
The Switch examines a received frame and learns the port from which this source MAC address came.
2
The Switch checks to see if the frame's destination MAC address matches a source MAC address
already learned in the
• If the Switch has already learned the port for this MAC address, then it forwards the frame to that port.
• If the Switch has not already learned the port for this MAC address, then the frame is flooded to all
ports. Too much port flooding leads to network congestion.
• If the Switch has already learned the port for this MAC address, but the destination port is the same as
the port it came in on, then it filters the frame.
MAC Table Flowchart
Fig ure 84
This link takes you to a screen where you can view the MAC address and VLAN ID of a device attach to
a port. You can also view what kind of MAC address it is.
Mo nito r: MAC T a b le
MAC T a b le
screen (a MAC table is also known as a filtering database) shows how frames are
. It also shows whether the MAC address is dynamic (learned by the Switch) or
MAC T a b le
Sta tic MAC Fo rwa rding
to determine how to forward frames. See the following figure.
MAC T a b le
.
MAC T a b le
GS1900 Series User's Guide
C
HA PTER
in .
Mo nito r
screen).
82
1 0