The Oui Screen - ZyXEL Communications GS1900 Series User Manual

Fig ure 134
The following table describes the labels in this screen.
Table 81 Configuration > VLAN > Voice VLAN > Global
L ABEL
Global
State
Voice VLAN ID
Cos/802.1p
Remark Cos/
802.1p
Aging Time
Apply
Cancel
20.4.2 T he O UI Sc re e n
Use this screen to view the OUI settings. The maximum number of entries is 16. Modifying the OUI table
will restart auto detection of OUI process. Click
screen.
Fig ure 135
Chapter 20 Configuration: VLAN
Configuration > VLAN > Voice VLAN > Global
DESC RIPT IO N
Select to activate the global voice VLAN feature.
Ena b le
Enter the global voice VLAN ID. It should be a unique VLAN ID in the system and cannot equal
each port PVID. It is a conflict in configuration if the value equals management VID, MVR VID,
PVID etc. The allowed range is 1 to 4094.
Displays the 802.1p packet priority field.
Select to the priority remark function for cos/802.1p.
Ena b le
Enter the voice VLAN secure learning aging time. The allowed range is 10 to 10000000 seconds.
It is used when security mode or auto detect mode is enabled. In other cases, it will be based
on hardware aging time. The actual aging time will be situated between the [age_time; 2 *
age_time] interval.
Click to save the changes.
Apply
Click to discard the changes.
C a nc e l
Configuration > VLAN > Voice VLAN > OUI
GS1900 Series User's Guide
>
C o nfig ura tio n VL AN
136
> > to open this
Vo ic e VL AN O UI