the IP address of your computer to be in the same subnet as that of the default Switch
IP address (192.168.1.1).
3.5 Re se tting the Switc h (G S1900- 24EP/ G S1900- 24HPv2/
G S1900- 48HPv2 o nly)
Use the
REST O RE
Switch.
3.5.1 Re sto re Butto n
Press the
REST O RE
automatically reboot and restore the factory default file. See
information about the LED behavior.
3.5.2 Re b o o t the Switc h
Press the
RESET
more information about the LED behavior.
Chapter 3 Hardware Overview
button to reset the Switch back to factory defaults. Use the
button for more than 6 seconds until the
button to reboot the Switch without turning the power off. See
GS1900 Series User's Guide
LED begins to blink. The Switch will
SYS
Section 3.3 on page 37
39
button to reboot the
RESET
for more
Section 3.3 on page 37
for