ZyXEL Communications GS1900 Series User Manual page 46

screen appears every time you log in using the default user name and default password.
G e tting Sta rt
5
If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator. Click
where you can change the administrator and SNMP passwords simultaneously. Otherwise, click Ignore
to close it.
Web Configurator: Warning
Fig ure 50
Web Configurator: Password
Fig ure 51
Change the default administrator and/or SNMP passwords, and then click
Table 7 Web Configurator: Password > Users/SNMP
L ABEL DESC RIPT IO N
User This is the default administrator account with the "admin" user name. You cannot change the
default administrator user name.
Old Password Type the existing system password (
New Password Enter your new system password.
New Password Retype your new system password for confirmation.
Confirm
SNMP
Use this section to specify the SNMP community (password) and access right values.
Community Enter a string identifying the community name that this entry should belong to. The allowed
string length is 1 to 20, and the allowed content is ASCII characters from 33 to 126.
Access Right Select the access mode for this entry. The possible values are
Chapter 5 Web Configurator
1234
GS1900 Series User's Guide
46
Pa sswo rd / SNMP
Apply
is the default password when shipped).
Re a d- O nly
to open a screen
to save your changes.
and .
Re a d- Write