ZyXEL Communications GS1900 Series User Manual page 27

Mounting the Switch on a Rack (GS1900-16, GS1900-24E, and GS1900-24EP)
Fig ure 9
Mounting the Switch on a Rack (GS1900-24, GS1900-24HP/GS1900-24HPv2, GS1900-48, and
Fig ure 10
GS1900-48HP/GS1900-48HPv2)
2
Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into
the rack.
Note: Make sure you tighten all the four screws to prevent the Switch from getting slanted.
3
Repeat steps 1 and
Chapter 2 Hardware Installation and Connection
2 to attach the second mounting bracket on the other side of the rack.
GS1900 Series User's Guide
27