The Port Screen - ZyXEL Communications GS1900 Series User Manual

Table 66 Configuration > Port > PoE > Global (continued)
L ABEL
Power Up
Sequence Delay
Apply
Cancel
19.4.2 T he Po rt Sc re e n
Use this screen to view Switch port PoE settings and select ports for configuration. Click
> >
Po rt Po E
Fig ure 119
The following table describes the labels in this screen.
Table 67 Configuration > Port > PoE > Port
L ABEL
Edit
Port
State
Chapter 19 Configuration: Port
DESC RIPT IO N
This field is only available on GS1900-8HP (Revision B1) and GS1900-10HP only.
Select to allow PoE ports to be powered up one-by-one randomly or
Ena b le
them all to be powered up at the same time.
Click to save the changes.
Apply
Click to discard the changes.
C a nc e l
to open this screen.
Po rt
Configuration > Port > PoE > Port
DESC RIPT IO N
Select one or more ports in the first column of the table and click this to configure PoE settings
for the ports.
Displays the port index number.
Displays which ports can receive power from the Switch. You can set this in the
> screen.
Po rt Po E Edit
• – The powered device (PD) connected to this port cannot get power.
Disa b le
• – The PD connected to this port can receive power.
Ena b le
GS1900 Series User's Guide
120
to allow
Disa b le
>
C o nfig ura tio n
>
C o nfig ura tio n