ZyXEL Communications GS1900 Series User Manual page 56

Each field is described in the following table.
Table 13 Getting Start > Start up > 1 Step 1 Set up IP
L ABEL DESC RIPT IO N
Host Name This field displays a host name.
IP Address The Switch needs an IP address for it to be managed over the network. The factory default
IP address is 192.168.1.1.
Subnet Mask The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Gateway Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. Enter a domain name server IP address in order to be able to use a domain
name instead of an IP address.
NTP (Network Time This field displays the NTP time servers from which the Switch gets the time and date.
Protocol)
Next Click
After clicking the set up your user name screen appears.
Ne xt,
Getting Start > Start up > 2 Step 2 Set up user name/password
Fig ure 57
Each field is described in the following table.
Table 14 Getting Start > Start up > 2 Step 2 Set up user name/password
L ABEL DESC RIPT IO N
Username The default user name is
Password The default user name is
Previous Click
Next Click
After clicking the finish screen appears.
Ne xt,
Chapter 6 Getting Start
to show the next screen.
Ne xt
and associated default password is
a dm in
and associated default password is
a dm in
to show the previous screen.
Pre vio us
to show the next screen.
Ne xt
GS1900 Series User's Guide
56
.
1234
.
1234