3: Video Output; 4: Transition Time - Roland V-160HD Reference Manual

3: VIDEO OUTPUT

Menu item Value
HDMI OUT 1–3
Adjusts the video that is output from the HDMI OUT 1–3 connectors.
OUTPUT STATUS
—
YPbPr (4: 4:
COLOR SPACE
RGB (0–255), RGB (16–235)
DVI-D/HDMI SIGNAL HDMI, DVI-D
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE -64–0–63
REC CONTROL OFF, ON
SDI OUT 1–3 Adjusts the video that is output from the SDI OUT 1–3 connectors.
OUTPUT STATUS
—
3G-SDI MAPPING
LEVEL-A,
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
Adjusts the video that is output from the USB STREAM port.
USB OUT
* You can edit the USB output video format and compression method from the livestreaming app or other app used at the
output destination.
OUTPUT STATUS
—
CONNECTION RESET
EXEC

4: TRANSITION TIME

Menu item Value
MIX/WIPE TIME
0.0–1 .0–4.0sec
PinP & KEY 1– 4 TIME 0.0–1 .0–4.0sec
DSK 1, 2 TIME
0.0–1 .0–4.0sec
OUTPUT FADE TIME 0.0–1 .0–4.0sec
Explanation
(bold text: default value)
Shows the format and an HDCP signal presence. If there is no connection, "NOT CONNECTED"
is shown.
4), YPbPr (4: 2: 2),
Specifies the color space.
Specifies the type of output signal.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Turns the REC control on/off. When this is "ON, " REC START/STOP commands can be sent to a
recorder that supports REC control functionality.
To use the REC control function, the REC START/STOP functions must be assigned to the
USER button. From the SYSTEM menu
"CATEGORY" to "REC CONTROL. "
Shows the format.
* When "HDCP" in the SYSTEM menu is "ON, " "HDCP MASKED" is displayed, and video/audio is
not outputted from the SDI OUT connectors.
LEVEL-B
Specifies the mapping structure of the 3G-SDI output.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Indicates whether the connection uses USB 2.0 (HIGH SPEED) or USB 3.0 (SUPER SPEED). If not
connected to a computer, this indicates "NOT CONNECTED. "
* When "HDCP" in the SYSTEM menu is "ON, " "HDCP MASKED" is displayed, and video/audio is
not outputted from the USB STREAM port.
Reconnects the computer and the V-160HD when the video is garbled or when operation is
otherwise unstable.
Explanation
(bold text: default value)
Specifies the video transition time.
For PinP compositing, specifies the fade-in/out time for the inset screen.
For DSK compositing, specifies the fade-in/out time for the overlay caption or video.
Sets the time it takes for the video and audio to fade in/out when you press the [OUTPUT FADE]
button.
Ó Ó
"USER SW ASSIGN" "USER 1 SW"–"USER 4 SW, " set
Menu List
77