2: Video Output; 3: Transition - Roland V-60HD Reference Manual

Menu List

2: VIDEO OUTPUT

Menu item Value
(bold text: default value)
SDI OUT 1, 2
OUTPUT STATUS
—
PGM, PVW, AUX
The default values are as follows.
OUTPUT ASSIGN
SDI OUT 1: PGM
SDI OUT 2: PVW
3G-SDI MAPPING LEVEL-A,
H FLIP OFF, ON
BRIGHTNESS -64–0–63
CONTRAST
-64–0–63
SATURATION -64–0–63
HDMI OUT 1, 2
OUTPUT STATUS —
PGM, PVW, AUX
The default values are as follows.
OUTPUT ASSIGN
HDMI OUT 1: PGM
HDMI OUT 2: PVW
COLOR SPACE YCC, RGB (0–255), RGB (16–235)
DVI-D/HDMI SIGNAL
DVI-D,
H FLIP OFF, ON
BRIGHTNESS
-64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE
-64–0–63
HDMI MULTI-VIEW
OUTPUT STATUS
(1080/59.94p, 1080/50p)
YCC, RGB (0–255), RGB (16–235)
COLOR SPACE
DVI-D/HDMI SIGNAL DVI-D,
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION
-64–0–63
RED -64–0–63
GREEN
-64–0–63
BLUE -64–0–63

3: TRANSITION

Menu item Value
(bold text: default value)
0–4.0 sec
TIME 0.0–1
MIX TYPE MIX, FAM, NAM
H-DOWN, H-UP, V-RIGHT, V-LEFT, H-IN, H-OUT, V-IN, V-OUT,
R-DOWN, L-DOWN, R-UP, L-UP, BLOCK, V-GRID, H-GRID, H-DOWN
WIPE 1 TYPE
s, H-UP s, V-RIGHT s, V-LEFT s, H-IN s, H-OUT s, V-IN s, V-OUT s,
R-DOWN s, L-DOWN s, R-UP s, L-UP s, BLOCK s, V-GRID s, H-GRID s
The default values are as follows.
WIPE 2 TYPE
WIPE 1 TYPE: V-RIGHT
WIPE 2 TYPE: H-DOWN
4
Explanation
This displays the video format.
* When "HDCP" (p. 14) is set to "ON, " "HDCP MASKED" is displayed and no video is output from
This sets the output bus assigned to the SDI OUT connectors.
LEVEL-B This sets the mapping structure for 3G-SDI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This displays information about the output video (video format and presence or absence of
an HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
This sets the output bus assigned to the HDMI OUT connectors.
This sets the color space.
HDMI
This sets the output mode for HDMI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This adjusts the red level.
This adjusts the green level.
This adjusts the blue level.
This displays information about the output video (video format and presence or absence of an
HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
* The output format at the MULTI-VIEW connector is fixed at "1080p" and cannot be changed.
This sets the color space.
HDMI This sets the output mode for HDMI output.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This adjusts the red level.
This adjusts the green level.
This adjusts the blue level.
the SDI OUT connectors.
Explanation
This sets the video transition time.
This specifies the transition pattern assigned to the [MIX] button.
This specifies the wipe pattern assigned to the [WIPE 1] button.
* Setting values indicated with "s" are soft edge wipe patterns.
This specifies the wipe pattern assigned to the [WIPE 2] button.
* Setting values indicated with "s" are soft edge wipe patterns.