2: Video Output - Roland XS-62S Reference Manual

2: VIDEO OUTPUT

Menu item Value (bold text: default value)
SDI OUT 1, 2
OUTPUT STATUS
—
PGM/1, PVW/2, AUX/3
The default values are as follows.
OUTPUT ASSIGN
SDI OUT 1:
SDI OUT 2:
3G-SDI MAPPING
LEVEL-A,
OFF, ON
H FLIP
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
HDMI OUT 1, 2
OUTPUT STATUS —
PGM/1, PVW/2, AUX/3
The default values are as follows.
OUTPUT ASSIGN
HDMI OUT 1:
HDMI OUT 2:
COLOR SPACE YCC, RGB (0–255), RGB (16–235)
DVI-D/HDMI
HDMI
DVI-D,
SIGNAL
H FLIP OFF, ON
BRIGHTNESS -64–0–63
CONTRAST
-64–0–63
SATURATION
-64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE -64–0–63
HDMI OUT 3
OUTPUT STATUS –
PGM/1, PVW/2, AUX/3,
OUTPUT ASSIGN
MULTI-VIEW
480p, 720p, 1080p, 800 x 600,
1024 x 768, 1280 x 800,
RESOLUTION (*9) 1366 x 768, 1280 x 1024,
1400 x 1050, 1600 x 1200,
1920 x 1200
YCC, RGB (0–255), RGB (16–235)
COLOR SPACE
HDMI
DVI-D/HDMI DVI-D,
ZOOM (*9) 10.0–100
Explanation
This displays the video format.
When "HDCP" (p. 23) is set to "ON, " "HDCP MASKED" is displayed and no video is output
from the SDI OUT connectors.
This sets the output bus assigned to the SDI OUT connectors.
PGM/1
PVW/2
LEVEL-B
This sets the mapping structure for 3G-SDI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This displays information about the output video (video format and presence or absence
of an HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
This sets the output bus assigned to the HDMI OUT connectors.
PGM/1
PVW/2
This sets the color space.
This sets the output mode for HDMI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This adjusts the red level.
This adjusts the green level.
This adjusts the blue level.
This displays information about the output video (video format and presence or absence
of an HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
* If OUTPUT ASSIGN is set to "MULTI-VIEW" for the HDMI OUT 3 connector, the output
format is fixed at "1080p. "
This sets the output bus assigned to the HDMI OUT 3 connector.
This sets the output resolution using the scaler.
This sets the color space.
This sets the output mode for HDMI output.
0–1000.0% (*10) This adjusts the zoom ratio.
5
Menu List