Roland V-160HD Reference Manual page 102

Menu List
Menu item Value
ENTER
Specifies the function that is assigned to the USER [1]–[4] button.
USER SW ASSIGN
ENTER
These settings are for the monitoring video assigned to the MONITOR [1]–[4] buttons.
MONITOR SW ASSIGN
LED DIMMER 1–8
LCD DIMMER 1–8
UPPER
ON SCREEN MENU
LOWER LEFT, LOWER RIGHT
TALLY FRAME
OFF,
102
Explanation
(bold text: default value)
Displays the USER SW ASSIGN menu.
USER SW 1–4
CATEGORY VALUE
N/A ---
FREEZE ---
AUTO SWITCHING SW
AUTO SWITCHING
BPM TAP
INPUT ASSIGN INPUT 1–10
STILL OUTPUT STILL 1–16
AUDIO IN 1–3/4
AUDIO INPUT MUTE USB IN, Bluetooth IN
HDMI 1–8, SDI 1–8
MASTER OUTPUT
AUDIO OUTPUT MUTE
AUX, USB OUT
VOICE CHANGER SW AUDIO IN 1, 2
REVERB (MOMENTARY) ---
REVERB (ALTERNATE) ---
NORMAL
INPUT SCAN
REVERSE
NORMAL
MEMORY SCAN
REVERSE
REC CONTROL ---
GPO (ONE SHOT) GPO 1–16
GPO (ALTERNATE) GPO 1–16
CAMERA CONTROL ---
Bluetooth CONTROL ---
Displays the MONITOR SW ASSIGN menu.
Menu item Value
N/A
MULTI-VIEW
16 INPUT-VIEW
MONITOR 1–4 SW
16 STILL-VIEW
PROGRAM
SUB PROGRAM
PREVIEW
AUX
Adjusts the brightness when the buttons or indicators are lit.
Adjusts the brightness of this unit's monitor.
LEFT, UPPER RIGHT,
Sets where the menu is displayed.
ON
Sets whether to display the tally frame or not in the monitor.
Explanation
No function is assigned.
Turns the freeze function on/off.
Turns the auto switching function on/off.
When "TYPE" in the AUTO SWITCHING menu is "BPM SYNC, " you can set
the BPM according to the tempo at which you press the button. The
buttons flash in sync with the current BPM setting.
Each time you press a button, the video source assigned to the specified
cross-point button switches to the following sources in order:
Ó Ó Ó Ó
HDMI 1 8 SDI 1 8 STILL 1
Pauses the normal output, and previews or final outputs a cut of the still
image.
Turns the mute function on/off for the input audio.
Turns the mute function on/off for the output audio.
Turns the voice changer on/off.
Reverb turns on only while the button is pressed.
Turns reverb on/off.
Each time you press a button, the final output switches from INPUT 1–10
in sequential order.
Each time you press a button, the final output switches from INPUT 1–10
in reverse order.
Each time you press a button, preset memories 1–30 are recalled in
sequential order.
Each time you press a button, preset memories are recalled in reverse
order from 30 through 1.
Controls the recorder's video record start/stop if a recorder that supports
REC control functionality is connected.
Outputs a control signal for 0.5 seconds.
The control signal output is switched on/off while the button is pressed.
Turns the camera control function on/off. When this is on, the CAMERA
PRESET [1]–[10] buttons can be used to recall the presets.
Turns the Bluetooth function on/off. Long-press the button to begin
pairing.
Explanation
No video is assigned.
The final output video, preview output video and the videos allocated
to the cross-point [1]–[8] buttons are shown in sections of the display
(multi-view).
The input video from the HDMI IN connectors and the SDI IN connectors
are shown as 16 separate sections on the screen
Shows the loaded still images in 16 separate sections on the screen.
Shows the final output video.
Shows the SUB PROGRAM bus video.
Shows the preview output video.
Shows the AUX bus video.
Ó
16
.