Roland V-160HD Reference Manual page 103

Menu item Value
AUX/SOURCE INDICATOR
OFF,
REC INDICATOR OFF,
AUDIO LEVEL METER OFF,
MASTER OUTPUT OFF, LEFT,
OFF, LEFT, RIGHT
AUX
OFF, LEFT, RIGHT
USB OUT
AUDIO IN/USB/Bluetooth OFF, LOWER, UPPER
MULTI-VIEW LABEL OFF,
AUTO HIDE OFF,
HDMI
MULTI-VIEW LABEL EDIT
1–16, PGM, SUN PGM, PVW
MULTI-VIEW LABEL SIZE SMALL,
MULTI-VIEW LAYOUT Specifies the videos to be shown in the PVW section (LEFT) and PGM section (RIGHT) in the multi-view.
PROGRAM
SUB PROGRAM
LEFT
RIGHT
PREVIEW
BLACK
ENTER
Sets whether to show the menu and other display elements in the video output from the HDMI OUT 3 connector.
Menu item
HDMI OUT 3 OSD
ON SCREEN MENU
TALLY FRAME
LABEL/LEVEL METER/INDICATOR
AUTO INPUT DETECT OFF, ON
TEST PATTERN Specifies the test pattern.
OFF, 75% COLOR BAR,
PATTERN 100% COLOR BAR, RAMP,
STEP, HATCH
MOTION DISABLE, SLOW, FAST
TEST TONE
Specifies the test tone.
LEVEL OFF, -20– -10–0dB
FREQUENCY L 500Hz–1kHz–2kHz
FREQUENCY R 500Hz–1kHz–2kHz
VIDEO FADER CALIBRATE ENTER
FACTORY RESET EXEC
VERSION
—
Explanation
(bold text: default value)
Sets whether to display the AUX/SOURCE indicators in the monitor.
ON
Sets whether to display the REC indicator in the monitor.
ON
When this is "ON, " a REC indicator showing that the camera's REC button has been pressed is
displayed, if the unit is connected to a camera that supports the REC status function.
ON
Specifies whether to display the audio level meter in the monitor.
RIGHT
Sets the display position of the audio level meter.
When this is "OFF, " the level meter is always hidden.
* This is displayed in the multi-view.
ON Specifies whether to display the label in the monitor.
ON
When this is "ON, " the label is hidden while the menu is open.
1– 8, SDI 1–8, STILL Edit the label name shown in the monitor.
Press the [VALUE] knob to access the LABEL EDIT screen.
NORMAL Specifies the text size of the label shown in the monitor.
Final output video. This is the default setting for "RIGHT. "
SUB PROGRAM bus video
Preview output video. This is the default setting for "LEFT. "
Black screen
Displays the HDMI OUT 3 OSD menu.
Turns the auto input detect function on/off.
When this is "ON, " input is automatically detected, and the video is switched when input from
the final output video is interrupted.
Selects the test pattern to display.
Specifies the scroll speed of the test pattern.
Adjusts the test tone volume.
Specifies the frequency of the test tone for the L-channel.
Specifies the frequency of the test tone for the R-channel.
Displays the VIDEO FADER SET screen.
Following the instructions on the screen, calibrate (adjust) the video fader.
In some cases, because of continued use or transport, the video output might not reach
100% even if you flip the video fader all the way upward or downward. Execute video fader
calibration in this case as well.
Returns the unit to its factory defaults.
Displays the version of the system program.
Color Explanation
Shows that this has been selected as an inset screen for
Yellow
the PinP & KEY.
Magenta Shows that this has been selected as a DSK video source.
Shows that this has been selected as an AUX bus video
Green
source.
Value Explanation
ON
OFF, Menu
OFF, ON Tally frame
OFF, ON Label, audio level meter, REC/AUX/SOURCE indicator
Menu List
103