2: Video Output - Roland XS-62S Reference Manual

Menu List

2: VIDEO OUTPUT

Menu item Value
SDI OUT 1, 2
OUTPUT STATUS —
PGM/1, PVW/2, AUX/3
The default values are as follows.
OUTPUT ASSIGN
SDI OUT 1:
SDI OUT 2:
3G-SDI MAPPING LEVEL-A,
H FLIP OFF, ON
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION
-64–0–63
HDMI OUT 1, 2
OUTPUT STATUS —
PGM/1, PVW/2, AUX/3
The default values are as follows.
OUTPUT ASSIGN
HDMI OUT 1:
HDMI OUT 2:
COLOR SPACE YCC, RGB (0–255), RGB (16–235)
DVI-D/HDMI SIGNAL DVI-D,
H FLIP OFF, ON
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION
-64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE
-64–0–63
HDMI OUT 3
OUTPUT STATUS
—
PGM/1, PVW/2, AUX/3,
OUTPUT ASSIGN
MULTI-VIEW
480p, 720p, 1080p, 800 x 600,
1024 x 768, 1280 x 800,
RESOLUTION (*9) 1366 x 768, 1280 x 1024,
1400 x 1050, 1600 x 1200,
1920 x 1200
COLOR SPACE YCC, RGB (0–255), RGB (16–235)
DVI-D/HDMI DVI-D,
ZOOM (*9)
10.0–100 .0–1000.0%
FULL
LETTERBOX
SCALING TYPE (*9)
CROP
DOT BY DOT
MANUAL
H FLIP (*9) OFF, ON
MANUAL SIZE H (*9) (*11) -2000–0–2000
MANUAL SIZE V (*9) (*11) -2000–0–2000
4
Explanation
(bold text: default value)
This displays the video format.
When "HDCP" (p. 19) is set to "ON, " "HDCP MASKED" is displayed and no video is
output from the SDI OUT connectors.
This sets the output bus assigned to the SDI OUT connectors.
PGM/1
PVW/2
LEVEL-B
This sets the mapping structure for 3G-SDI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This displays information about the output video (video format and presence or absence
of an HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
This sets the output bus assigned to the HDMI OUT connectors.
PGM/1
PVW/2
This sets the color space.
HDMI
This sets the output mode for HDMI output.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This adjusts the red level.
This adjusts the green level.
This adjusts the blue level.
This displays information about the output video (video format and presence or absence
of an HDCP signal). When no connection is in effect, "NOT CONNECTED" is displayed.
* If OUTPUT ASSIGN is set to "MULTI-VIEW" for the HDMI OUT 3 connector, the output
This sets the output bus assigned to the HDMI OUT 3 connector.
This sets the output resolution using the scaler.
This sets the color space.
HDMI This sets the output mode for HDMI output.
(*10) This adjusts the zoom ratio.
This always displays the picture expanded to full screen, irrespective of the aspect ratio
of the input video.
This enlarges or reduces the incoming video to a full-screen view while keeping the
aspect ratio unchanged.
This enlarges or reduces the incoming video so that the output picture has no blank
margins while keeping the aspect ratio unchanged. Video extending beyond the
borders is cut off.
This performs no scaling.
Scale according to the "MANUAL SIZE H" and "MANUAL SIZE V" settings below.
Setting this to "ON" flips the output video horizontally.
(*10) This adjusts the horizontal size.
(*10) This adjusts the vertical size.
format is fixed at "1080p. "