Adjusting Output Video - Roland XS-62S Owner's Manual

Video Input/Output Settings

Adjusting Output Video

You can adjust the output video to match the equipment
receiving the output from the XS-62S.
MEMO
You can output a test pattern, useful for adjusting the image
quality of a display. You use the [MENU] button 0 "SYSTEM"
0 "TEST PATTERN" to specify the test pattern.
Select the [MENU] button 0 "VIDEO OUTPUT" 0
1.
the output video.
A menu for the selected output video appears.
2.
Select a menu item, then use the [VALUE] knob to
adjust the output video.
SDI OUT 1, 2: SDI OUT 1, 2 connectors
Menu item Explanation
This selects the bus (video) that is output
OUTPUT ASSIGN
from this connector.
This sets the mapping structure for
3G-SDI MAPPING
3G-SDI output.
Setting this to "ON" flips the output video
H FLIP
horizontally.
BRIGHTNESS
This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
HDMI OUT 1–3: HDMI OUT 1–3 connectors
Menu item Explanation
This selects the bus (video) that is output
from this connector.
OUTPUT ASSIGN
(*1)
The HDMI OUT 3 connector also lets you
select multi view monitor display (p. 16).
This specifies the resolution of the output
RESOLUTION (*2)
video (*3).
This sets the color space (system for
COLOR SPACE
representing colors in video).
This sets the output mode for HDMI
DVI-D/HDMI
output.
ZOOM (*2) This adjusts the zoom ratio.
SCALING TYPE (*2) This sets the scaling type.
Setting this to "ON" flips the output video
H FLIP (*2)
horizontally.
14
Menu item Explanation
MANUAL SIZE H (*2) This adjusts the horizontal size.
MANUAL SIZE V (*2) This adjusts the vertical size.
This adjusts the display position in the
POSITION H (*2)
horizontal direction.
This adjusts the display position in the
POSITION V (*2)
vertical direction.
BRIGHTNESS This adjusts the brightness.
CONTRAST
This adjusts the contrast.
SATURATION This adjusts the saturation.
RED This adjusts the red level.
GREEN This adjusts the green level.
BLUE This adjusts the blue level.
(*1) Refer to the "About the HDMI OUT 3 Connector" (p. 14).
(*2) This is available when the HDMI OUT 3 connector's "OUTPUT
ASSIGN" (p. 16) is set to something other than "MULTI-VIEW. "
(*3) If the HDMI OUT 3 connector's "OUTPUT ASSIGN" (p. 16) is
set to "MULTI-VIEW, " the output format is fixed at "1080p. "
For output formats other than when MULTI-VIEW is selected,
refer to "Output formats using the scaler" (p. 14).
3.
Press the [VALUE] knob to apply the setting.
4.
Press the [MENU] button to quit the menu.
About the HDMI OUT 3 Connector
The output of the HDMI OUT 3 connector can display a list of
input/output videos, an audio level meter, and a menu screen
(multi view monitor display).
It can also output video at a variety of resolutions using the scaler.
For details on output settings for the HDMI OUT 3 connector, refer
to "Selecting the Video of the Bus to Output" (p. 16).
Output formats using the scaler
If the HDMI OUT 3 connector's "OUTPUT ASSIGN" (p. 16) is set
to something other than MULTI-VIEW, you can use the scaler to
output a variety of output resolutions.
When set at "59.94 Hz"
480/59.94p
720/59.94p
1080/59.94p
800 x 600, 60 Hz
1024 x 768, 60 Hz
1280 x 800, 60 Hz
1280 x 1024, 60 Hz
1366 x 768, 60 Hz
1400 x 1050, 60 Hz
1600 x 1200, 60 Hz
1920 x 1200, 60 Hz
Frame rate
When set at "50 Hz"
576/50p
720/50p
1080/50p
800 x 600, 75 Hz
1024 x 768, 75 Hz
1280 x 800, 75 Hz
1280 x 1024, 75 Hz
1366 x 768, 75 Hz
1400 x 1050, 75 Hz
1600 x 1200, 60 Hz
1920 x 1200, 60 Hz