Table of Contents
Advertisement
Menu List
14: MACRO
Menu item
Value
1: DEMO
EXECUTE
100: MACRO100 (*13)
ALL,
INITIALIZE
100: MACRO100 (*13)
1: DEMO
100: MACRO100 (*13)
Menu item
1: (operation name)–
10: (operation name)
LIST EDIT
PREVIEW
COPY MACRO TO
SWAP MACRO WITH
1: DEMO
NAME EDIT
100: MACRO100 (*13)
LOAD FROM USB MEMORY ENTER
SAVE TO USB MEMORY
ENTER
When "MACRO" is selected on the [MODE] button, this sets how many buttons function as macro selection buttons.
NUMBER OF MACRO SW
10
30
ENTER
Specifies the macro assigned to each button.
Menu item
SW ASSIGN
MACRO 1–10
PGM/A 1–10 (*14)
PST/B 1–10 (*14)
(*13) If you edited a macro's name using "NAME EDIT, " the edited name is shown.
(*14) This can be set if "NUMBER OF MACRO SW" is "30. "
FUNCTION EDIT
Menu item
Value
PGM TAKE
PGM/PST SELECT
AUX SELECT
INPUT ASSIGN
TRANSITION TIME
TRANSITION TYPE
FUNCTION
PinP & KEY ON/OFF
PinP & KEY SOURCE
PinP & KEY WINDOW
DSK ON/OFF
DSK SOURCE
SPLIT ON/OFF
SPLIT TYPE
Sets the timing of the operation to execute.
AFTER PREVIOUS
TIMING
SAME AS PREVIOUS
MOVE THIS FUNCTION
ENTER
COPY THIS FUNCTION
ENTER
DELETE THIS FUNCTION
EXEC
92
Explanation
(bold text: default value)
Select a macro (a series of recorded operations) to execute.
1–
Press the [VALUE] knob to execute the macro.
When "MACRO" is selected on the [MODE] button, you can use the MACRO [1]–[10] buttons to
execute macros 1–10.
1: DEMO
1–
Selects the macro to be initialized.
Press the [VALUE] knob to initialize the macro.
1–
Selects the macro to edit.
Press the [VALUE] knob to show the operations recorded in the macro.
Value
—
EXEC
1: DEMO 1–
100: MACRO100 (*13)
1: DEMO 1–
100: MACRO100 (*13)
1–
Selects the macro to be renamed.
Press the [VALUE] knob to access the screen for editing the name.
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select a macro setting file and load the macro (1–100) into the unit.
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select the macro settings file used to save the macro (1–100) to the USB flash drive. If you
selected "NEW FILE..., " a new macro settings file is saved.
MACRO [1]–[10] buttons
MACRO [1]–[10] buttons, PGM/A [1]–[10] buttons, PST/B [1]–[10] buttons
Displays the SW ASSIGN menu.
Value
1: DEMO 1–
100: MACRO100 (*13)
(bold text: default value)
SPLIT POSITION
AUDIO INPUT LEVEL
AUDIO INPUT MUTE
AUDIO OUTPUT LEVEL
AUDIO OUTPUT MUTE
PRESET MEMORY
MACRO
OUTPUT FADE
REC CONTROL
GPO ONE SHOT
GPO ALTERNATE
CAMERA PRESET RECALL
WAIT
Explanation
Shows the list of operations recorded in the macro.
"----------" is shown if no operations are recorded.
Select an operation or "ADD NEW FUNCTION" and press the [VALUE] knob to
display the FUNCTION EDIT menu (shown below) for editing the operation.
Previews the macro.
Specifies the macro copy source.
Press the [VALUE] knob to copy the macro.
Specifies the macro swap destination.
Press the [VALUE] knob to swap the macro.
Explanation
MACRO [1]–[10] buttons
PGM/A [1]–[10] buttons
PST/B [1]–[10] buttons
Explanation
Sets the operation to record to the macro.
* The related menu is shown according to the operation you set.
WAIT:
Sets the waiting time before the next operation is executed.
The function is executed after the preceding one. The next sequential list
number is used.
Executes the operation at the same time as the preceding one. The same list
number as the previous operation is used.
Moves the operation being edited and resorts the list.
Copies the operation being edited into a position in the list you desire.
Deletes the operation being edited.
Hide quick links:
Advertisement
Table of Contents
