Table of Contents
Advertisement
Menu List
21: LAN CONTROL
Menu item
Value
Selects how settings are made for the IP address, subnet mask, and default gateway.
MANUAL
CONFIGURE
USING DHCP
IP ADDRESS (*17)
---.---.---.---
SUBNET MASK (*17)
---.---.---.---
DEFAULT GATEWAY (*17) ---.---.---.---
NETWORK PASSWORD
ENTER
ENTER
Displays the following information.
Item
STATUS
IP ADDRESS
INFORMATION
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
QR code
(*17) This can be set if "CONFIGURE" is "MANUAL. "
98
Explanation
(bold text: default value)
This is to be configured manually.
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
Specifies the IP address as appropriate for the network to which the unit is connected.
Specifies the subnet mask as appropriate for the network to which the unit is connected.
Specifies the default gateway as appropriate for the network to which the unit is connected.
Displays the NETWORK PASSWORD screen.
Set the necessary password for network connection, using four characters.
Show password
Password not set
Password set
* Input the password that's set here when connecting a computer or other device on the same
network to access the V-160HD.
Displays the LAN INFORMATION screen.
Explanation
Connection status
IP address
Subnet mask.
Default gateway
MAC address
QR code for accessing the Smart Tally settings screen (Web)
* Note that the QR code is not shown if the V-160HD is disconnected from the network.
– – – –
Hide quick links:
Advertisement
Table of Contents
