Table of Contents
Advertisement
Preventing Unintended Operation
(Panel Lock)
You can disable operation of the panel's buttons and knobs to
prevent unintended operations (Panel Lock function).
Ó
1 .
[MENU] button
"SYSTEM"
press the [VALUE] knob.
The PANEL LOCK menu appears.
2 .
Use the [VALUE] knob to select a target for panel lock,
and press the [VALUE] knob.
Menu item
ALL SW & VOLUME
PGM/A 1–10 SW
PST/B 1–10 SW
INPUT ASSIGN SW
CUT SW
AUTO SW
MODE SW
AUX SW
MEMORY SW
MACRO SW
TRANSITION SW
VIDEO FADER
SPLIT BLOCK
SEQUENCER BLOCK
PinP & KEY 1–4 BLOCK
DSK 1, 2 BLOCK
MONITOR 1–4 SW
OUTPUT FADE SW
CAPTURE IMAGE SW
USER 1–4 SW
AUDIO IN 1–3/4 VOLUME
AUTO MIXING SW
AUX VOLUME
USB STREAM VOLUME
MASTER OUTPUT VOLUME [MASTER OUTPUT] knob
3 .
Use the [VALUE] knob to specify whether panel lock is
enable (ON) or disable (OFF), and press the [VALUE] knob.
4 .
Press the [MENU] button to close the menu.
MEMO
The [MENU] button blinks when you try to operate a locked
button, knob or other control.
Ó
select "PANEL LOCK," and
Explanation
The following settings are turned on/off
together.
PGM/A cross-point [1]–[10] buttons
PST/B cross-point [1]–[10] buttons
[INPUT ASSIGN] button
[CUT] button
[AUTO] button
[MODE] button
AUX [1]–[10] buttons
MEMORY [1]–[10] buttons
MACRO [1]–[10] buttons
[TRANSITION] button
Video fader
[SPLIT 1] [SPLIT 2] buttons
[PGM/A-CENTER] [PST/B-CENTER] knobs
Buttons in the SEQUENCER section
Buttons and knobs in the PinP & KEY
sections
Buttons and knobs in the DSK sections
MONITOR [1]–[4] buttons
[OUTPUT FADE] button
[CAPTURE IMAGE] button
USER [1]–[4] buttons
AUDIO INPUT LEVEL [1] [2] [3/4] knob
[AUTO MIXING] button
[AUX] knob
[USB STREAM] knob
Returning to the Factory Settings
(Factory Reset)
Here's how you can return the settings of the V-160HD to their
factory-set state.
If following the procedures described in this manual does not cause
the result you expect, try executing a factory reset.
NOTE
¹ When you execute a factory reset, all the settings you've made
as well as the data saved on the V-160HD (preset memory,
macros, sequencer, and still images) is lost.
¹ Do not turn off the power while the message "PLEASE WAIT"
is shown.
Ó
1 .
[MENU] button
"SYSTEM"
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 .
Use the [VALUE] knob to select "YES," and press the
[VALUE] knob.
Factory reset is executed. When the operation is finished, the
message "COMPLETE" appears.
3 .
Press the [MENU] button to close the menu.
Other Functions
Ó
select "FACTORY RESET,"
73
Hide quick links:
Advertisement
Table of Contents
