Applying A Fade To Pgm/Pvw Output Video (Output Fade) - Roland V-60HD Owner's Manual

Video Operations
Applying a Fade to PGM/PVW Output
Video (Output Fade)
This performs a fade-out from the output video to a black screen,
or a fade-in from a black screen to the output video.
You can insert a black screen into the output video at times
where you don't want to output a picture, such as at intervals in
presentations or band performances.
MEMO
Fade-ins and fade-outs are applied to the final video output
(program output) and the preset video (preview output).
Applying a fade to AUX-bus output is not possible.
1.
Press the [OUTPUT FADE] button to perform a fade-out.
During the fade, the [OUTPUT FADE] button flashes.
When the fade-out is complete, the [OUTPUT FADE] button lights
up.
2.
To perform a fade-in, press the [OUTPUT FADE] button again.
When the fade-in is complete, the [OUTPUT FADE] button goes
dark.
MEMO
5 The length of the fade-in or fade-out time uses the setting for
length transition time.
5 You can apply a fade-in and fade-out for both video and audio
at the same time. [MENU] button0"SYSTEM"0set "OUTPUT
FADE TYPE" to "VIDEO & AUDIO. "
20