5: Mix/Wipe; 6: Split - Roland V-160HD Reference Manual

Menu List

5: MIX/WIPE

Menu item Value
Selects the transition effect.
You can also use the [TRANSITION] button to switch between MIX and WIPE.
TRANSITION TYPE
MIX
WIPE
Specifies the transition pattern for mix.
MIX
MIX TYPE
FAM
NAM
Specifies the transition pattern for wipe.
HORIZONTAL
WIPE TYPE
WIPE DIRECTION NORMAL, REVERSE, ROUND TRIP Specifies the direction of wipe.
WHITE, YELLOW, CYAN, GREEN,
WIPE BORDER COLOR MAGENTA, RED, BLUE, BLACK,
SOFT EDGE
WIPE BORDER WIDTH 0–3–14

6: SPLIT

Menu item Value
SPLIT 1, 2 These are the detailed settings for the split composite.
SPLIT OFF, ON
These parameters configure the split screen layout.
SPLIT V
SPLIT TYPE
SPLIT H
PGM/A-CENTER -50.0–0 .0–50.0%
PST/B-CENTER -50.0–0 .0–50.0%
CENTER POSITION
-50.0–0 .0–50.0%
WHITE, YELLOW, CYAN, GREEN,
BORDER COLOR
MAGENTA, RED, BLUE, BLACK
BORDER WIDTH 0–3–14
78
Explanation
(bold text: default value)
The two videos are mixed as the transition occurs.
The next video moves across to replace the original video.
The two videos are mixed as the transition occurs.
Video transitions are made with the luminance levels of the two video streams maintained
unchanged. This is an abbreviation of "full additive mix. "
The two video streams are compared, and transitions are made with display during transition
starting with levels of high luminance. This is an abbreviation of "non-additive mix. "
VERTICAL UPPER LEFT
Specifies the color of the border added to the edge of the wipe area.
When this is set to "SOFT EDGE, " the wipe border is blurred.
Specifies the width of the border added to the edge of the wipe area.
Explanation
(bold text: default value)
Turns the split composition on/off.
You can also use the [ SPLIT 1 ] or [SPLIT 2] button to turn this on/off.
This vertically crops the center section of the video (split left/right).
This horizontally crops the center section of the video (split upper/lower).
When at SPLIT V
Adjusts the horizontal position of the video placed on the left.
You can also adjust this by turning the [PGM/A-CENTER] knob.
When at SPLIT H
Adjusts the horizontal position of the video placed above.
You can also adjust this by turning the [PST/B-CENTER] knob.
* This positions the PGM/A bus video to the left or upper side.
When at SPLIT V
Adjusts the horizontal position of the video placed on the right.
You can also adjust this by turning the [PGM/A-CENTER] knob.
When at SPLIT H
Adjusts the horizontal position of the video placed below.
You can also adjust this by turning the [PST/B-CENTER] knob.
* This positions the PST/B bus video to the right or lower side.
Adjusts the position of the boundary.
You can adjust this by turning the [PGM/A-CENTER] or [PST/B-CENTER] knob while pressing it.
Specifies the color of the border.
Adjusts the width of the border.
UPPER RIGHT LOWER LEFT
A B A B
A B A B
A
A
B
A
B
A B
B
LOWER RIGHT H-CENTER V-CENTER