13: Preset Memory - Roland V-160HD Reference Manual

13: PRESET MEMORY

Menu item Value
1: MEMORY
LOAD
30: MEMORY 30 (*12)
1: MEMORY
SAVE
30: MEMORY 30 (*12)
ALL,
INITIALIZE
30: MEMORY 30 (*12)
1: MEMORY
NAME EDIT
30: MEMORY 30 (*12)
Specifies the settings loaded at startup.
LAST MEMORY
START UP
1: MEMORY 1–
30: MEMORY 30 (*12)
MEMORY PROTECT OFF,
When "MEMORY" is selected on the [MODE] button, this sets how many buttons function as memory selection buttons.
10
NUMBER OF MEMORY SW
30
FADE TIME 0 .0–4.0sec
MIX/WIPE OFF,
PinP & KEY 1–4 OFF,
DSK 1, 2
OFF,
Specifies whether to recall the following items when recalling a preset memory.
LOAD PARAMETER
Items that are turned off are excluded from the preset memories that are recalled.
VIDEO ASSIGN OFF,
VIDEO INPUT OFF,
VIDEO OUTPUT OFF,
TRANSITION TIME OFF,
MIX/WIPE OFF,
SPLIT OFF,
PinP & KEY OFF,
DSK OFF,
VIDEO CROSSPOINT OFF,
INITIALIZE, ON
VIDEO FADER
AUDIO INPUT OFF,
AUDIO OUTPUT
OFF,
AUDIO FOLLOW
OFF,
AUDIO AUTO MIXING
OFF,
(*12) If you edited a preset memory's name using "NAME EDIT, " the edited name is shown.
Explanation
(bold text: default value)
Selects the preset memory to load.
1–
Pressing the [VALUE] knob lets you load the preset memory.
When "MEMORY" is selected on the [MODE] button, you can use the MEMORY [1]–[10] buttons to
recall preset memories 1–10.
Selects a preset memory for saving settings.
Pressing the [VALUE] knob lets you save the settings to the preset memory.
When "MEMORY" is selected on the [MODE] button, you can long-press the MEMORY [1]–[10]
buttons to save the settings to preset memories 1–10.
* The following settings are not saved in preset memory.
1–
¹ PRESET MEMORY menu
¹ MACRO menu
¹ SEQUENCER menu
¹ STILL IMAGE menu
¹ FREEZE menu
¹ AUTO SWITCHING menu
Selects the preset memory to be initialized.
1: MEMORY 1–
Press the [VALUE] knob to initialize the preset memory.
Selects the preset memory to be renamed.
1–
Press the [VALUE] knob to access the screen for editing the name.
Restores the state that was in effect immediately before the power was turned off (Last Memory
feature).
The current settings (Last Memory values) are saved every 4 seconds, and when you exit a menu.
Recall the settings at the selected preset memory.
When this is "ON, " prohibits settings from being saved or initialized. This protects the preset memories.
ON
* Protected preset memories are erased if you perform a factory reset.
Preset memory 1–10: MEMORY [1]–[10] buttons
Preset memory 1–10: MEMORY [1]–[10] buttons
Preset memory 11–20: PGM/A [1]–[10] buttons
Preset memory 21–30: PST/B [1]–[10] buttons
Sets how long the transition to the next video takes when recalling a preset memory.
* The time you set is used for the parameters below.
ON
When this is "ON, " the transition effect is applied when the preset memory is recalled.
When this is "ON, " the inset screen fades in when you recall a preset memory that includes a PinP
ON
composite.
When this is "ON, " the superimposed caption and video fades in when you recall a preset memory
ON
that includes a DSK composite.
ON
VIDEO ASSIGN menu
ON
VIDEO INPUT menu
ON
VIDEO OUTPUT menu
ON TRANSITION TIME menu
ON MIX/WIPE menu
ON SPLIT menu
ON PinP menu
ON DSK menu
ON Cross-point button state
Video fader position
When set to "INITIALIZE, " the video fader position is recalled when the video fader is pushed all the
way up or pulled all the way down.
ON AUDIO INPUT menu
ON
AUDIO OUTPUT menu
ON
AUDIO FOLLOW menu
ON
AUDIO AUTO MIXING menu
¹ CTL/EXP menu
¹ RS-232/TALLY/GPO/GPI menu
¹ LAN CONTROL menu
¹ CAMERA CONTROL menu
¹ USB MEMORY menu
¹ SYSTEM menu
Menu List
91