2: Video Output; 3: Transition Time; 4: Mix/Wipe - Roland V-1HD+ Reference Manual

2: VIDEO OUTPUT

Menu item Value
(bold text: default value)
OUTPUT 1, 2 Adjusts the video that is output from the OUTPUT 1 and 2 connectors.
OUTPUT STATUS —
Specifies the output bus that is assigned to the OUTPUT connector.
PROGRAM
OUTPUT ASSIGN
PREVIEW
MULTI-VIEW
COLOR SPACE YPbPr, RGB (0–255), RGB (16–235) Specifies the color space (system for representing colors in video).
DVI-D/HDMI SIGNAL HDMI, DVI-D
BRIGHTNESS
-64–0–63
CONTRAST
-64–0–63
SATURATION
-64–0–63
RED
-64–0–63
GREEN -64–0–63
BLUE -64–0–63
REC CONTROL ON
OFF,

3: TRANSITION TIME

Menu item Value
(bold text: default value)
MIX/WIPE TIME 0–4.0sec
0.0–1
PinP TIME 0–4.0sec
0.0–1
DSK TIME 0–4.0sec
0.0–1

4: MIX/WIPE

Menu item Value
(bold text: default value)
Selects the transition effect.
You can also use the [TRANSITION] button to switch between MIX and WIPE.
TRANSITION TYPE MIX
WIPE
Specifies the transition pattern for mix.
MIX
FAM
MIX TYPE
NAM
Specifies the transition pattern for wipe.
HORIZONTAL
WIPE TYPE
WIPE DIRECTION NORMAL, REVERSE,
WHITE, YELLOW, CYAN, GREEN,
WIPE BORDER COLOR MAGENTA, RED, BLUE, BLACK,
SOFTEDGE
WIPE BORDER WIDTH 0–3–14
Explanation
Shows the connection status of the OUTPUT connector.
Final output video. This is the default setting for "OUTPUT 1. "
Preview output video (the video to be output next)
Multi-view. This is the default setting for "OUTPUT 2. "
Specifies the type of output signal.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Turns the REC control on/off. If this is "ON, " REC START/STOP commands can be sent to a
recorder that supports REC control functionality.
* To use the REC control function, the REC START/STOP functions must be assigned to the [DSK
PVW] or the [DSK ON] button. Set the "DSK PVW SW ASSIGN" or "DSK ON SW ASSIGN" in the
SYSTEM menu to "REC START/STOP. "
Explanation
Specifies the video transition time.
For PinP compositing, specifies the fade-in/out time for the inset screen.
For DSK compositing, specifies the fade-in/out time for the overlay logo or video.
Explanation
The two videos are mixed as the transition occurs.
The next video moves across to replace the original video.
The two videos are mixed as the transition occurs.
Video transitions are made with the luminance levels of the two video streams maintained
unchanged. This is an abbreviation of "full additive mix. "
The two video streams are compared, and transitions are made with display during transition
starting with levels of high luminance. This is an abbreviation of "non-additive mix. "
VERTICAL UPPER LEFT
ROUND TRIP Specifies the direction of wipe.
Specifies the color of the border added to the edge of the wipe area.
If this is set to "SOFTEDGE, " the wipe border is blurred.
Specifies the width of the border added to the edge of the wipe area.
UPPER RIGHT LOWER LEFT LOWER RIGHT H-CENTER
Menu List
V-CENTER
45