Table of Contents
Advertisement
NOTICE
Keep the lower center part of the rear bumper clean at all times.
●
If the lower center part of the rear bumper is dirty or covered with snow, the kick
sensor may not operate.
In this situation, clean off the dirt or snow, move the vehicle from the current position
and then check if the kick sensor operates.
If it does not operate, have the vehicle inspected by your Lexus dealer.
●
Do not apply coatings that have a rain clearing (hydrophilic) effect, or other coatings,
to the lower center part of the rear bumper.
●
Do not park the vehicle near objects that may move and contact the lower center part
of the rear bumper, such as grass or trees.
If the vehicle has been parked for a while near objects that may move and contact the
lower center part of the rear bumper, such as grass or trees, the kick sensor may not
operate.
In this situation, move the vehicle from the current position and then check if the kick
sensor operates.
If it does not operate, have the vehicle inspected by your Lexus dealer.
●
Do not subject the kick sensor or its surrounding area to a strong impact.
If the kick sensor or its surrounding area has been subjected to a strong impact, the
kick sensor may not operate properly.
If the kick sensor does not operate in the following situations, have the vehicle
inspected by your Lexus dealer.
The kick sensor or its surrounding area has been subjected to a strong impact.
•
The lower center part of the rear bumper is scratched or damaged.
•
Do not disassemble the rear bumper.
●
●
Do not attach stickers to the rear bumper.
Do not paint the rear bumper.
●
If a bicycle carrier or similar heavy object is attached to the power back door, disable
●
the kick sensor.
INFORMATION
■
Kick sensor operating conditions
●
When the kick sensor operation setting is turned on
The electronic key is within the operational range
●
1-4. Entering/exiting the vehicle and loading luggage
1
93
Advertisement
Table of Contents
