Table of Contents
Advertisement
■
Acceleration Suppression at Low Speed
When driving at a low speed, if the accelerator
pedal is strongly depressed and the system de-
termines that there is a possibility of a collision,
engine output will be restrained or the brakes will
be applied weakly to restrict acceleration. During
operation, a buzzer will sound and a warning
indicator and message will be displayed on the
multi-information display.
■
Suspension control
When the system determines that the possibility of a collision is high, the Adaptive
Variable Suspension system
absorbers to help maintain an appropriate vehicle posture.
WARNING
■
Pre-collision braking
●
When the pre-collision braking function is operating, a large amount of braking force
will be applied.
●
If the vehicle is stopped by pre-collision braking function, the driver should operate the
brakes as necessary.
●
In the following situations, brake hold will not operate after the pre-collision braking
function has operated. Depending on the situation, the driver should operate the brake
pedal immediately.
•
When the accelerator pedal is depressed
•
When the vehicle is stopped by intersection collision avoidance support
•
When the vehicle is stopped on a steep slope
●
The pre-collision braking function may not operate if certain operations are per-
formed by the driver. If the accelerator pedal is being depressed strongly or the
steering wheel is being turned, the system may determine that the driver is taking
evasive action and possibly prevent the pre-collision braking function from operating.
If the brake pedal is being depressed, the system may determine that the driver is
●
taking evasive action and possibly delay the operation timing of the pre-collision brake
control.
■
Acceleration Suppression at Low Speed function
If the steering wheel is being turned, the system may determine that the driver is taking
evasive action and possibly prevent the Acceleration Suppression at Low Speed function
from operating.
6-2. Using the safe driving support functions
(→ P.358)
controls the damping force of the shock
6
367
Advertisement
Table of Contents
