1
Confirm that the electronic key is being car-
ried.
When connecting the jumper (or booster) cables,
depending on the situation, the alarm may activate
and the doors may lock.
2
Open the hood.
3
Remove the positive (+) battery terminal cov-
er.
4
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
9-5. If a door cannot be opened or locked
NX250
▶
NX350
▶
on your vehicle and connect the
on the second vehicle. Then,
on the second vehicle and connect the
9
631