Small motorcycles, bicycles, pedestrians, etc.
●
Vehicles moving away from your vehicle
●
Vehicles approaching from the parking spaces next to your vehicle
●
●
The distance between the sensor and approaching vehicle gets too close
■
Situations in which the system may not operate properly
The RCTA function may not detect vehicles correctly in the following situations:
When the sensor is misaligned due to a strong impact to the sensor or its surrounding
●
area
When mud, snow, ice, a sticker, etc.,is covering the sensor or surrounding area on the
●
position above the rear bumper
When driving on a road surface that is wet with standing water during bad weather,
●
such as heavy rain, snow, or fog
When multiple vehicles are approaching with only a small gap between each vehicle
●
●
When a vehicle is approaching at high speed
●
When equipment that may obstruct a sensor is installed, such as a towing eyelet,
bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
●
When backing up on a slope with a sharp change
in grade
●
When backing out of a sharp angle parking spot
*1 :
Depending on the conditions, detection of a vehicle and/or object may occur.
6-2. Using the safe driving support functions
*1
*1
417
6