Table of Contents
Advertisement
sound and a message will be displayed on the multi-information display to inform you that
the shift position has been changed to N.
■
Automatic P position selection function
In the following situations, the shift position is automatically changed to P.
When pressing the engine switch with the vehicle stopped while the engine switch is
●
in ON and the shift position is in a position other than P (after the shift position has
changed to P, the engine switch will turn off )
●
If the driver' s door is opened and all of the following conditions are met, while the shift
position is in a position other than P
•
The engine switch is in ON.
•
The driver is not wearing the seat belt.
•
The brake pedal is not depressed.
To start off the vehicle after the shift position is changed to P, operate the shift lever
again.
●
When the vehicle is stopped after the engine has been stopped in an emergency while
driving.
●
When voltage of the battery drops while the shift position is in a position other than P.
■
If the shift position cannot be shifted from P
There is a possibility that the battery is discharged. Check the battery in this situa-
tion.(→ P.589)
WARNING
■
For the shift lever
●
Do not remove the shift lever knob or use anything but a genuine Lexus shift lever
knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift
lever from returning to position, causing unexpected accidents to occur when the
vehicle is in motion.
In order to prevent the shift position from accidentally being changed, do not touch the
●
shift lever when not using them.
■
P position switch
Do not press the P position switch while the vehicle is moving.
●
*1 :
When the engine switch is pressed while driving at extremely slow speeds, such as
immediately before stopping the vehicle, the shift position may automatically change
to P. Make sure that the vehicle is completely stopped before pressing the engine
switch.
2-2. Driving procedures
*1
2
167
Advertisement
Table of Contents
