Table of Contents
Advertisement
6-2. Using the safe driving support functions
Turning the Safe exit assist system ON/OFF
The Safe exit assist system can be changed between ON and OFF on the center
display
1
Select
.
2
Select [Driving assist] .
3
Select [Safe exit assist] .
When the Safe exit assist function is disabled, the driving assist infomation indicator
illuminates.
Each time the engine switch is turned off then changed to ON, the Safe exit assist
will be enabled automatically.
INFORMATION
■
The Safe exit assist is operational when
The Safe exit assist is operational when all of the following conditions are met:
When the engine switch is ON, less than 3 minutes have elapsed since the engine was
●
off, or less than 3 minutes have elapsed since a door was opened and someone has
entered the vehicle (the time which operation is possible may be extended if a door is
opened and closed)
●
Safe exit assist is on
●
The vehicle is stopped.
●
The shift position is in a position other than R.
■
The Safe exit assist will detect a vehicle when
The Safe exit assist will detect a vehicle present in the detection area in the following
situations:
When the vehicle is stopped and a vehicle or bicycle, which is traveling parallel to the
vehicle, is approaching within the area that a door opens (other than the back door)
■
Opening the doors when opening is canceled by the system
Perform the following operation to open a door.
After the approaching vehicle or bicycle passes or changes direction, check the sur-
rounding area and press the door opener switch again.
Press and hold an inside door opener switch for approximately 3 seconds or more
●
→ P.401
Press an inside door opener switch quickly 3 times or more
●
*1 :
The faster a vehicle or bicycle is approaching, the distance at which an outside rear
view mirror indicator will illuminate or blink will become further.
404
Advertisement
Table of Contents
