Table of Contents
Advertisement
5-1. Functions and displays of the meter
Fuel gauge
G
Displays the quantity of fuel remaining in the tank.
Odometer and trip meter display
H
Multi-information display
I
Presents the driver with a variety of vehicle data and displays warning messages if a
malfunction occurs .
Background color of driving mode
J
Background color changes according to the driving mode.
Distance to empty
K
Displays the driving range with remaining fuel.
INFORMATION
■
The meters and display illuminate when
The engine switch is in ON.
■
Outside temperature display
●
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change:
•
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
•
When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
When "--" or "E" is displayed, the system may be malfunctioning.
●
Take your vehicle to your Lexus dealer.
■
Distance to empty
●
This distance is computed based on your average fuel consumption. As a result, the
actual distance that can be driven may differ from that displayed.
●
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the
engine switch off, the display may not be updated.
■
Liquid crystal display
Small spots or light spots may appear on the display.
This phenomenon is characteristic of liquid crystal displays, and there is no problem
continuing to use the display.
■
Free/Open Source Software Information
This product contains Free/Open Source Software (FOSS). The license information
and/or the source code of such FOSS can be found at the following URL.
https://www.denso.com/global/en/opensource/meter/toyota/
322
Advertisement
Table of Contents
